|
Ive actually went out and looked for the info the other day when I found out here about LC32. The only things I found were on TBSS and truck forums. No sales/pricing info, a couple max effort dyno pulls detailed on the forum but not a single picture of the ramp. I had looked for info on a ramped inlet prior to starting on mine but couldnt find anything until I knew to search for Left Coast 32. That is when I saw the exterior of the inlet and the belt wrap bracket. Their belt wrap bracket is a complete replacement for the bearing support, the one I made previously and only replaces the spacer block. I will freely post a pic of the internals of my ramp, which I now also know to be different than the LC32, having recently seen a couple pictures. Anyone with experience with fluid dynamics can understand that the stock TVS2300 had plenty of room for improvement in the inlet area, which is where I started with a fiberglass prototype which I will also freely provide a picture of if there is a question of how ours was designed.
Now knowing that LC32 made the first inlet, I would be glad to congratulate him on his advancement of the TVS blowers and pushing them to their full potential as we are trying to do with our products mentioned and the 14 row intercooler brick we have made. He apparently beat us to ot by a wide margin, but I may have missed those product releases while I was in Iraq and/or Afghanistan. I never set out to blantantly copy someone else's work while claiming it as my own.
|