Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - IT LIVES! My Z/LE ZL1 + 1LE + 2SS = Z/LE ;o) LSA SC [COTW 2/09/15]

hammdo · 02-16-2017, 10:34 PM

OK, finished programming the micro-controller (set it to supply power @ startup for 4 minutes using the video and pdf doc), then created my wire harness:

Next, I'll route this wiring, then route the vacuum lines. Once those are set, a running test! That will be tomorrow...

The blue wire is switch power, red is battery/terminal power, and the black wires are grounds.

-Don

02-16-2017, 10:34 PM	#1118
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,709 View My Garage	OK, finished programming the micro-controller (set it to supply power @ startup for 4 minutes using the video and pdf doc), then created my wire harness: Next, I'll route this wiring, then route the vacuum lines. Once those are set, a running test! That will be tomorrow... The blue wire is switch power, red is battery/terminal power, and the black wires are grounds. -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 Last edited by hammdo; 02-18-2017 at 10:03 AM.