Quote:
Originally Posted by Hevenom635
I have the wastegate reference line teed into the brake booster line. I also have the sensor for the controller teed off the brake booster line. Is this incorrect and if so why? Top port of the wastegate is going to the solenoid valve along with a line from the charge tube going to the other side of the valve.
|
I would never feed the wastegate or boost solenoids from the intake...there is no reason to ever do this and no good instructions will ever show to do this, and given the wastegate system leaks...this in turn will cause leaks on that entire line. ie it can leak vacuum to the booster and under pressure leak signal to anything fed off it.
Any gauge, map sensor, FPR etc or any critical items like that should never be attached to any line with leaks on it. You could connect all 3 of those together if you wished from a dedicated port on the intake manifold.