|
When I installed mine I made sure all of the tubes, elbows, etc. were all the way on, as far as possible, and rotated and jiggled each piece together to make sure there was a good fit, and put the clamps on just "hand tight" until everything was in place, then snugged 'er all down. Make sure the clamps are nice and loose when putting the pieces together so they don't interfere with fitment.
__________________
Overkill/Self Tuned; Mace Camshafts; K&N Typhoon Cold Air Intake; Ported 80mm Throttle Body/Intake Manifolds/Manifold Spacer; Solo Performance High-Flow Cats, Cat-back Exhaust; Vitesse Motorsports Throttle Controller; Elite Engineering E2 Catch Can; BC Racing BR Coilovers; JPSS Delrin Radius Rod Bushing Inserts, Sway Bars; Pegasus Aluminum Rear Cradle Bushings, Camber/Caster Plates; Z/28 Toe Links, Trailing Arms, Upper Control Arm Bushings, Rear Shock Mounts
|