[frankwjr]

Was waitin for other peeps to chime in...here is my q...did you do ANY rear suspension work recently? If so peeps forget about the need to "TIME" the rear suspension bolts....ie the car needs to be put back together and then on flat level surface with all 4 tires on the ground, ramps wat ever...the rear bolts need to be slightly loosened(all at the same time!) so the suspension can "settle". Then re-tighten to spec...

Found this out the hard way when replacing the front bearings on a Volvo XC-90...the front end danced all over and when braking would try to dart to the right...all I did was the above(on the front end tho) and prob SOLVED! And this was after I had it re-aligned...good luck...