Quote:
Originally Posted by Zl1TopLess
So am i going to be the guinea pig? That's an expensive chance. But the numbers seem to all work and i have checked the clearances and its there. The front wheel is about 3 to 5 mm in and the rear is about 15 mm in from outer fender lip to rim face. with a 20x12 43 that's another 13 out, it will be close. I was also consider a 11.5 just to hit the min on a 335 tire. Whats the widest tire anyone has put on the 20x11 43 wheel? Was there any rubbing issues? Camber does come into play with these numbers.
|
Honestly if you can find a local guy with a GS/Z06/ZR1 body style in C6 or C7 to unbolt his and mock them up on your ZL1 you'd be able to get an idea, those are be 20x12 with 59mm offset, bolt pattern should be the same. Not 100% sure it would work at all but it's worth a shot if you can.
I know a 11" wheel will stick out the same as a 12" wheel as the 12" just adds more on the inside. This is unventured territory.