Quote:
Originally Posted by Ppriyam
Hey, I'll be doing this soon and was wondering how the stock sub works with after market radio
|
Everything should work off the bat if you're using factory equipment.
The PAC RPK5-GM4101 kit makes sure that it does.
However, if you have custom subs and amplifier, then you'll either need to splice into your factory wire, run new lines from your stereo, or use the FARK kit.
But you'll lose the center channel with after market amp, you'll need to crossover the left and right to simulate the center with another amp.
You'll have at least 3 amps in all (at least) if you're going aftermarket amps and attempting to retain all speakers/sub.