06-07-2017, 09:01 AM
|
#3
|
Drives: 2014 ZL1 M6
Join Date: May 2017
Location: Dunedin, FL
Posts: 99
|
Quote:
Originally Posted by JB'sZL1
To bleed the system with the D3 properly installed all you have to do is fill it and idle it (with the cover off) for 10 minutes and it will self bleed...the D3 is installed above the pump.
If the pump isn't working you will need to replace it. When not dragging or tracking, and w/o any severe mods, I have found my Z cools fine when driving. But then I'm in the north, and we have only a handful of 90' days. The hood extractor works as it should when driving. If you have severe mods, or are dragging the car, in FL heat you may want additional cooling.
|
I have a few mods. What kind of additional cooling?
__________________
The Widow Maker
2014 ZL1, M6
Kooks LTs, Air Raid CAI, 2.55 upper pulley, D3 reservoir, Elite catch can, ID 850s, flex fuel, DMS auxiliary fuel pump, fasterproms tune
|
|
|