Quote:
Originally Posted by Splat
Hate to bring up an old topic, but I cant find the answer that I was looking for.
How to secure the Z/28 fender/quarter flares?
I know that there is about 3 screws that secure through the bumper into the flare, and that the flare has 3m tape..... but is there anything else? like a bracket?
|
Correct - there are 4 little screws that go through the bumper cover in to the flare (bumper cover needs to be drilled). There is also a built-in bracket with 3M tape already mounted - think it has the red plastic strip that peels off. And there is a special adhesive to bond the flare on securely to the wheel well perimeter in places. Note there is a tab that engages to the Z28 rocker and also a front fitting on the flare the engages in to the Z28 splitter at the front. It is tricky to get the flares installed perfectly and securely. There are threads on technique to install.
Pic follows of the inside surface of the Left flare.
__________________
2014 2SS/RS, Z28 CAI and High Wing Spoiler, ZL1 5.1:1 Ratio Short-Throw Shifter, ZL1 Pedals, ZL1 splash guards, NPP Dual-mode quad tip exhaust, Z28 strut tower brace, Camaro LED Cup-holders with footwell Lighting option, Leather visors, and Leather E-brake boot. Chevy dealer sponsored 67 retro SS nose stripe package.
