Quote:
Originally Posted by aris
How well does the 325 fit the front rim? I was considering doing it but ultimately didn't because I thought the wheel wasn't wide enough.
Any pics?
|
Hi, just took some pictures for you Aris. The 11J rim is within Pirelli's spec for the 325/30/R19 (see here
https://www.pirelli.com/tires/en-us/...pzero-trofeo-r)
Picture order
1) rear 325/30/R19 on OEM 11.5J wheel. No spacer, factory camber.
2) front 325/30/R19 on OEM 11J wheel. No spacer (yet), max neg camber.
As you can see, there is a slight bulge on the front but it's not much different to how the rear is. Just the inherent shape of the Trofeo sidewall really...
Something really interesting for those that have been following this thread
http://www.camaro5.com/forums/showth...=501083&page=3
is that the two sets of Trofeo Rs I have are different!! One set (front) came off a Porsche 911 GT2 RS as very lightly worn. They are missing a set of very short grooves on the shoulder that you can see in my second set (rear) that are brand new June 2017. The older set also have the lettering picked out in red (I don't like it, any ideas how to remove?)
Whether this is anything to do with the Porsche N-spec ratings I don't know. I'm sure they will all be fine on the track!
