[h018871]

Originally Posted by hammdo

I did mine a bit differently. I used abs and created a 'pad' to bolt them on -- set them up for 'track' first, then, I'm able to use the 'daily' duct.

http://www.camaro5.com/forums/showpo...postcount=1584

http://www.camaro5.com/forums/showpo...postcount=1585

-Don

slick idea Don!

I'm trying a different (more expensive) approach.
The 6th gen arms are slightly shorter, see pics. This will increase the caster without using adjustment bolts and wallowing out the front mount in the frame. I've already done that, but am looking to see if i can get a bit more adjustability out of it. I'm maxed out on the adjustment now at 7 degrees. I feel as though the shorter arm will give 7-8 degrees without any adjustment on the bolt.
I'm tracking at Cresson this weekend and hope to get the arms in and an alignment done before i go.
The arms in the picture are the standard SS arms, I got the '17 SS 1LE arms to try