Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - IT LIVES! My Z/LE ZL1 + 1LE + 2SS = Z/LE ;o) LSA SC [COTW 2/09/15]

hammdo · 10-09-2017, 12:25 PM

Damn! All the drivers edge 3.1 groups sold out already for November (non-solo)... figures...

Bought an ZL1 Alcantara auto steering wheel.. The leather one is too slick for road racing -- at least in my hands anyway... will have that in the next week.

Doing some logging... found the alcohol content goes from 79% to 0% around 5k rpm -- AFR is still commanded between 8.75 and 10.25. No KR, no DTCs -- looks totally electrical. Checking the wiring to see if a wire is pinched or not. Moved the connector from one coil to another... still did it. I ordered a new harness from Dave @ DSX (this is not something wrong with his work, I had to splice into the harness to test, so, rather make sure 100%) -- he's great to work with. What can I say, ah the fun of modding...

-Don

10-09-2017, 12:25 PM	#1605
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,709 View My Garage	Damn! All the drivers edge 3.1 groups sold out already for November (non-solo)... figures... Bought an ZL1 Alcantara auto steering wheel.. The leather one is too slick for road racing -- at least in my hands anyway... will have that in the next week. Doing some logging... found the alcohol content goes from 79% to 0% around 5k rpm -- AFR is still commanded between 8.75 and 10.25. No KR, no DTCs -- looks totally electrical. Checking the wiring to see if a wire is pinched or not. Moved the connector from one coil to another... still did it. I ordered a new harness from Dave @ DSX (this is not something wrong with his work, I had to splice into the harness to test, so, rather make sure 100%) -- he's great to work with. What can I say, ah the fun of modding... -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 Last edited by hammdo; 10-09-2017 at 01:43 PM.