Quote:
Originally Posted by Luis13RS
Bumping thread. Few questions. Found a set of Front brembo brakes with stock brake lines and pads. Will the stock lines fit on a v6? I purchased new rotors already, just wondering what else ill need if the kit comes with the calipers, pads, and lines already. Im assuming ill reuse the stock hardware correct? Thanks in advance
|
The lines will work as long as these are the lines that were on the Brembo calipers from the factory. Regarding the front brakes, you should purchase new caliper mounting bolts (GM part number 11570788) as these bolts are torque to yield bolts, in other words use them once and throw them out. The threads can easily get stretched. You will need four of these bolts, the torque is only 30 foot pounds, it's the "plus 90 degrees" that gets the old muscles working.
You will also need 4 new crush washers (GM part number 21012386), these are the washers that go on the break line connecting to the caliper banjo bolt.
What about the back ones?