View Single Post
Old 05-14-2015, 10:39 AM   #27
spadz93
BUMBL Z
 
spadz93's Avatar
 
Drives: 2015 ZL1
Join Date: Nov 2013
Location: Northern NJ
Posts: 2,573
Quote:
Originally Posted by Brittany View Post
Yes, Rockaway!

Also I'll try to get a tentative head count by around Wednesday and reserve us a table. Let me know if you have any +1s so we're guaranteed a place to sit together!


Sent from my iPhone using Tapatalk
count me in! also gonna have a +1 as well

Quote:
Originally Posted by punk5150 View Post
If it's vinyl. Park in the sun and use a heat gun and it should come right off. My car had stripes and they came right off. You may have some shadowing on the pain though. Depends how long they were on the car.
do this, but make sure you don't keep the heat gun centered in one spot at a time. after you remove the vinyl, get some compound to even out the spots/get rid of some of the leftover grime from the edges, and polish/wax as usual. shouldn't be too difficult, just take time and be patient
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq

spadz93 is offline   Reply With Quote