Quote:
Originally Posted by R1CH
To all the guys who installed these in their garage on jack stands; how hard is it to fish the passenger side header in from the bottom? Were you able to get it jacked up high enough?
My headers will hopefully be here sometime this week. 
Thanks! |
Just as easy on the passenger side. Just take note of where the dipstick tube comes out and goes back in.
There is a shield around the starter (that wasn't on the 4th gen cars) which makes it a little easier as well.
You won't need the passenger side higher. Just make sure to use proper lifting equipment and be safe about it.
Let us know how it turns out!,
Ivan
