Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

Kilo-9 · 02-02-2011, 11:20 PM

I love my Xa's. I'm at max drop out back and have 10mm between the lock rings up front. I can't go any lower out back...Justice Pete says that my OEM heights were about 10mm higher than average (693mm front, 700 mm rear), which would explain why my car sits a bit higher in the rear with the coilovers fully adjusted down. I think I'm going to go ahead and take the fronts down all the way until the rings are touching.

02-02-2011, 11:20 PM	#37
Kilo-9 Dog Is My Copilot Drives: 2011 2SS/RS LS3 Join Date: Jun 2009 Location: Pittsburgh, PA Posts: 1,394	I love my Xa's. I'm at max drop out back and have 10mm between the lock rings up front. I can't go any lower out back...Justice Pete says that my OEM heights were about 10mm higher than average (693mm front, 700 mm rear), which would explain why my car sits a bit higher in the rear with the coilovers fully adjusted down. I think I'm going to go ahead and take the fronts down all the way until the rings are touching. __________________