Quote:
Originally Posted by ChibiBlackSheep
What parts are you cleaning?
If it's the filter, you can shake it out. But if it's a dry filter... you just replace the filter if it's dirty.
|
what?
if its a dry filter (no oil) you can clean it in dawn soap/water, let it dry, and then install
for an oiled filter you must use a dedicated filter cleaner, dawn/water, or a degreaser to remove the oil and dirt. once you have cleaned it set it to dry and once dry you apply clean air filter oil before installing it. don't over use the oil though
if it is a stock paper panel filter (stock intake) then you just chuck those and replace with another
__________________
2010 2SS/RS
Z/28 intake, NW, FAST 102, speed engineering LT's, some exhaust, ATI -10% pulley, GM flex fuel injectors, DSX flex fuel sensor, MGW shifter, HP Tuners, some suspension work, stickers and a little weight loss. 12.63 @113.53