View Single Post
Old 12-30-2013, 06:02 AM   #25

Scott@Bjorn3D's Avatar
Drives: Kami, 2013 2SS LS3 Luvin
Join Date: Oct 2008
Location: Eufaula, Alabama
Posts: 6,407
Send a message via MSN to Scott@Bjorn3D
Originally Posted by wakespeak View Post
Hi guys just confirmed my 2013 FE4 SS has the 20941932 front cradle bushings. I can just see the part number from under the car on the exposed part of the bushing. I am thinking the rears are also the same as the track pack kit as well. The track pack must assume 2010-2011 FE3 as a starting point, which has the earlier bushing type. This makes sense as the shock mounts are not needed on the FE4 cars either...I am going to make a leap and say the FE6 front struts are the same "re-valved" FE4 units also.

I am just going to do the rear shocks and the sway bars on top of the FE4.
They are not the same. My kit just came in and I went and held the new bushings. The new ones I can not squeeze or flex, the ones on my car I can easily push in with my hand. The ones on my car are just soft rubber.
Scott@Bjorn3D is offline   Reply With Quote