Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - Has anyone broke one of these yet? (Rear Lower Control Arm Endlink Tab)

JusticePete · 05-04-2011, 08:21 PM

We don't want to turn a fleet of 5th Gens into test cars, so we'll use PQ's.

PQ,

I need your help again.

I would like to have you re-install the partially failed arm you sent me -- with the new welded in tab installed. We have measured the existing cracks and after 30 days of use we'll want the arm back to see if the welded tab has prevented further deterioration. I'll have the arm ready to ship to you early next week.

I know you do your own work, but I would be more than willing to pay to have the arm installed and removed along with the costs of alignments. Real world on the road testing with PQ -- the one and ONLY C5 member to have failed to rear LCAs!!!!

05-04-2011, 08:21 PM	#348
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,174	We don't want to turn a fleet of 5th Gens into test cars, so we'll use PQ's. PQ, I need your help again. I would like to have you re-install the partially failed arm you sent me -- with the new welded in tab installed. We have measured the existing cracks and after 30 days of use we'll want the arm back to see if the welded tab has prevented further deterioration. I'll have the arm ready to ship to you early next week. I know you do your own work, but I would be more than willing to pay to have the arm installed and removed along with the costs of alignments. Real world on the road testing with PQ -- the one and ONLY C5 member to have failed to rear LCAs!!!!