Quote:
Originally Posted by kga10734
Got mine done, but I still need to go back and glue the tube in place and do the fine sanding to the trim pieces. At least I have it working so far. Once I get the dash fine tuned, I'll start working on the doors. I may go ahead and put El wire in the doors as well.
The sanding is a bitch, but trying to get the El wire down the tubes is worse unless you had a trick to do it.
|
It could be that there were internal burrs on the tube after you cut it ? If I recall correctly, you ordered the 2.5mm wire too. I know the tube here in Canada can accommodate 2.5mm wire easily, maybe the U.S. aquarium industry uses a thicker wall
I don't think there's an issue with spraying a little lube before you insert
