Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post - IT LIVES! My Z/LE ZL1 + 1LE + 2SS = Z/LE ;o) LSA SC [COTW 2/09/15]

hammdo · 11-22-2014, 06:37 PM

I'm doing so many mods that I needed to have one place to keep them. Instead of posting several places (like I've been doing), I'm going to start consolidating and just reference links.

So, the first set of links are just going to reference what I've done up to now.

After that, I'm going to:

Post my ZL1 brake upgrade (front and rear!) with the Stainless brake lines, my 'pressure' bleeding DIY tool I've built, and the L99 VVT cam and heads upgrade I've have planned (working with GPI on that one).

So, here is what I've done so far...

My first set of mods (including Vararam Intake, JBA spark-plug wires, 1LE strut bar, GPI tune, stainless headers w HFC, muffler delete, Texas Speed underdrive pulley, VMax throttle body, and 3.91 gears):

http://www.camaro5.com/forums/showthread.php?t=364759

Shot from the top:

http://www.camaro5.com/forums/album....ctureid=127508

The 'View My Garage' has more pics as does clicking on the 'Avatar' of my car...

Now, my DIY for the stainless Catch Can:

http://www.camaro5.com/forums/showthread.php?t=366135

11-22-2014, 06:37 PM	#2
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,694 View My Garage	I'm doing so many mods that I needed to have one place to keep them. Instead of posting several places (like I've been doing), I'm going to start consolidating and just reference links. So, the first set of links are just going to reference what I've done up to now. After that, I'm going to: Post my ZL1 brake upgrade (front and rear!) with the Stainless brake lines, my 'pressure' bleeding DIY tool I've built, and the L99 VVT cam and heads upgrade I've have planned (working with GPI on that one). So, here is what I've done so far... My first set of mods (including Vararam Intake, JBA spark-plug wires, 1LE strut bar, GPI tune, stainless headers w HFC, muffler delete, Texas Speed underdrive pulley, VMax throttle body, and 3.91 gears): http://www.camaro5.com/forums/showthread.php?t=364759 Shot from the top: http://www.camaro5.com/forums/album....ctureid=127508 The 'View My Garage' has more pics as does clicking on the 'Avatar' of my car... Now, my DIY for the stainless Catch Can: http://www.camaro5.com/forums/showthread.php?t=366135 Last edited by hammdo; 08-01-2015 at 04:06 PM.