Quote:
Originally Posted by was619
They are at 36 'cold' (north Alabama 90+ temps most of the day)
I will see what I can do as far as spacers go. Pete what's your opinion on larger spacers like hubcentric 20-25mm spacers? That way the wheels we be mostly flush with the fenders
|
36 is more than enough so we can't gain anything there.
Way too much. At the most you'll need 6mm per side. If that is what's required you install ARP studs and get billet aluminum spacers. First try 3 or 4mm spacers. Cover the bare steel mark on the struts with a single layer of masking tape. If the tape stays in place you are good to go. If not we know what to do next.