This is the official thread for our concept afterburners.
As some have suggested, DOT/NHTSA will be on the back burner for now. We have matched the brightness of the stock brake lights and will start with that.
Phase II: Complete Tail Lamps
This is for people that don't want to DIY. Just swap out your stock lamps for ones that have been fully modified.
Please post if you wish to be placed in the list.
Interested:
- Mindz
- John Deere Boy
- alssiri
- Viral
- Linkwpc
- rlshky
- kingofcharlotte
- layzurguy
Older Info
It's been a long journey, but, we seem to be well on track for hitting a price-point of $500 or less!
Update: $419 is the kit price for first run!
Phase 1: DIY Kits
Tools Required:
- Trim tool for removing tail-cover clips and bezels
- Wrench for nuts that hold tails into bumper
- Dremel or utility knife for separating lens from housing
Other Materials:
That's it!
The basic kit consists of four light modules and four outer diffusers. After opening the housings and removing the inner lens, the modules mount inside and plug into the stock bulb connectors. If you have non-RS tails, you may want to black out the chrome lip inside. Lastly, you insert the outer diffusers and seal up the outer lens.
You can choose either the original, light outer-diffuser, or, the new, dark version (last two pics). A few other options will be detailed soon, such as flicker and sequential brake/turn.
See below for the group-buy list! When we hit 25 confirmed, the price will be $419 plus shipping! Deposits are being accepted ($127) and these should ship ~4 weeks after we get to 25 (or close).
Note that these are LED's, so, you will need load resistors (4x 6 ohm, at least 35W) to eliminate the Bulb Out errors on the DIC and hyperflashing. You can get them yourself, or, we can supply a set of four with t-taps for $28 (special price for those that have purchased the kit, normally $35).
We will update this thread with more info, and, the important bits will always be found in this first post.
Thanks to all of those that have purchased our other products which have allowed us to get to this point in under one year!
Light diffuser on left, dark on right.
Flicker Demo
This is the list for the DIY kits...
- TH3_1NJIMID8TOR - In process!
- Twoblindsheep - In process!
- UF4LIFE102SS - In process!
- agkelly73 - Installed!
- David B - Installed!
- SSSoon - Installed!
- Jbcamaro - Installed!
- DarkneSS - Installed!
- yotaman96 - Installed!
- A Pirate - Installed!
- Jose A. - Delivered!
- slick rick - Delivered!
- Elykson - Installed!
- Bumblebee (C5G) - Installed!
- ???
- MINE!
Signed up initially:
Maniature
dacannon
jeffswhitess
TCAT
*Nerd*2LTRS