Quote:
Originally Posted by Nine Ball
Randy,
Since you bought yours used, it probably doesn't have the little pieces of black wire loom holding up the bolts that bolt the lower intake manifold to the top of the heads. These temporary pieces of loom make it MUCH easier to sit the blower on top of the engine, so that those long bolts don't drop down and grab onto the intake ports. Good idea to make some more of those before lifting that heavy mofo up there.
You won't need a BAP for under 550 rwhp. That should cover a 3.6 pulley with your longtubes no problem.
|
big time helpful hint.
You will not be able to get rear bolts in without doing this. I believe they were ~ 1 inch long.