Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

olblue75 · 07-04-2020, 11:10 AM

If you only had 2 29254415 hub bearings (Z28 hub bearings) would you put them on the front or rear, now considering nothing is wrong with current bearings but just a road race autoX upgrade. I’m thinking front since the pressure is more on the front than the rear especially during hard prolonged cornering. I think I have my mind made up just wanna make sure my thinking is in the right the direction.

07-04-2020, 11:10 AM	#1
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,064	Hub Bearing Placement If you only had 2 29254415 hub bearings (Z28 hub bearings) would you put them on the front or rear, now considering nothing is wrong with current bearings but just a road race autoX upgrade. I’m thinking front since the pressure is more on the front than the rear especially during hard prolonged cornering. I think I have my mind made up just wanna make sure my thinking is in the right the direction. __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.