New 416 c.i. Forged Road Course Engine
Hi guys,
The new power plant is done and tuned. Cannot wait to go to the track.
Here's the Cliff's Notes version of the build:
416 c.i. all-forged stroker LS3
Brian Tooley cam
Baffled Oil Pan
DSS 1,000 HP axles
Runs on 91 octane
Conservative tune
I had Brian Tooley design me a very special cam. I wanted gentle cam lobe profiles to ensure that this engine will withstand hopefully years of hard tracking abuse. I race this car in the NASA ST2/TT2 classes, so I cannot exceed a certain HP level but would benefit from gobs of low end torque. My goal was to not exceed around 515 RWHP, anything higher than that would bump me into the next higher ST1/TT1 class. Well Brian delivered with precision:
514.6 RWHP and 497 RW Ft-Lb (also plotted is a previous build):
Last edited by Orange Crush 1LE; 10-29-2014 at 10:33 PM.
|