Quote:
Originally Posted by TCao
Any pics of these with your coilovers?
What's your recommended installation position for the adjustment plate (orange anodized) for dual high performance street/track application? All the way outboard and adjust camber to -1 deg. and then move the adjustment plate inboard for an additional -1 deg camber for track days?
Thanks.
 |
Hi TCao,
Pics are below. We just got our final photography back of these units. Check them out here:
http://www.pfadtracing.com/photos/sh...ry.php/cat/522
If you take a look at our recommended alignment settings below, a great place to start would be to set the camber plate in the middle, and have the OEM eccentrics adjusted to achieve ~1.5 degrees negative camber. That way you can move the plates all the way inboard for track use, and then all the way outboard for street use. We can't specifically say exactly what degrees this will be, due to it being ride height dependent. But this is where you will want to start.
Check out the pics!
