Suspension time
Upgrade allot of the suspension pieces, got rid of a lot of the wheel hop. Michelin tires are over sized. Lakewood rear frame connector. BMR tunnel brace. Stainless brake lines. Vorshlag front camber plates, I had to make some reinforcement plates for the mount bolts,also had to enlarge the passenger side hole to fit the plate. Modified some 1/2" spacers for the rear springs, did not like the front higher than the rear, now it sits right! The Lakewood frame stiffeners also tie into the rear cradle, it is allowed to move up and down but not side to side or shimmy. Installed 5/8" hose onto springs to stop the popping noise. (wet with windex to slide hose on)
Last edited by Vicster; 04-22-2024 at 10:45 AM.
|