Quote:
Originally Posted by redleader
Sorry, I am always late to the Party! :-O :-)
I have a few questions to clarify what you did please...
Mine is a 2010 V6 and I have 2010 V8 parts for this project MOD...
- V8 365mm diameter rear Rotors fit fine on a V6 that usually takes 315mm rear Rotors? And the hand brake drums also fit fine?
- V8 Brembo rear Callipers replace the V6 OEM rear Callipers and fit the V6 wheel hub fine to reach over the V8 365mm rear Rotors?
- No need to buy V8 rear dust shields as the V6 rear dust shields can be cut down?
Many thanks for your replies √ |
It was a long time ago that I did that swap and from what I can remember it all went smoothly and straight forward with the parts that I had.
The hand brake works well (it passes inspection every year) and I haven't even adjusted it once since I did the swap.
Most of the information that I used to do the job I researched on this forum, so defiantly look around and read about how others did it.
Sorry I can't be more helpful, but good luck and I hope that everything works well for you!