most of the forced induction kits sold will include the mating (required) injectors. As for a fuel pump booster, the stock system will support 475 to 500 at the rear. After that you need at minimum a fuel pump booster. To be safe an in tank pump and system upgrade should be done when going over 600 rwhp.
If you had a prof tune for say 8 psi then it would be fine at 6psi because the MAF would correct for it. However if you had a tune for say 12 psi and then only made 6, it would be super rich and yes a hand held with 2 tunes can accomplish your goal. If the question was can you adjust boost on the fly, yes with a turbo boost can be adjusted very easily and there are controllers that make it easy to go from 3 psi to 20 psi and beyond with ease
As for installer - we are happy to hook you up with the right company in your area - we have a few
|