View Single Post
Old 02-28-2009, 10:23 AM   #14
SRFnSNO's Avatar
Drives: Blown & Flamed
Join Date: Feb 2009
Location: Jerzy
Posts: 654
I striped the Bad rim down to Alum. By myself $175 in striper and 1.5 week of soaking and scrubing; w/wire brush and scraper. (the striper is recyclable if any one needs some)

My work gets lots of parts power coated so as long as I used a color that they had it was Pro-Bono.
Powder is purchased by the Pound Min. order is usualy 2-5 lbs depends on color. (if you are good you may able to get a sample pack usualy under 1lb)
There are 3 basic types of powder each having its own propitys. Any will work. Note:this dose not include the New plastic powder.
In my area I have heard of rims costing fron $75 to $150 per rim.
Hint have then coat I/S & Out. My guy only did the Face.

But I realy could not complain.
Attached are pics of new back in 03
and from last year 08 after 5years on the Ride Notice the Red ring Faded.
Attached Images
SRFnSNO is offline   Reply With Quote