Quote:
Originally Posted by ihaveacamaro
do you have any suggestions on how I should do it?
I don't have nor want to make a toggle switch for the footwells. But I already have the AAC front footwells in place in the front spliced to the dome light wire.
any ideas? I would want the rears to come on with the front...
Thanks,
Roshan
|
Just connect the positive wire from each of the rear lights, then run a wire to the front and connect it to the same positive the fronts are connected to. Do the same with the ground. Run the wires under the carpet into the center console area up to where you connect it to the front lights.
Like shown in this picture.