Quote:
Originally Posted by Nutro
Jon,
Could you fit a 22x10.5 at all 4 corners? And possibly run a 285/35/22 at all corners? It's for an SS car lowered 1" on Pfadt springs.
|
X10 is widest we can run up front-- with these off-the shelf offsets; on a custom made wheel we can manipulate the offsets and make it happen.
285/35-22 won't fly on stock height, much less with 1" drop; 285/30-22 will clear.
See the following thread for the 22x10, 22x11 mesh wheel; that wheel you can run 22x10 all around...
http://camaro5.com/forums/showthread.php?t=198293
Hope this helps...