Looking to do this mod also. I didn't like the rubber plug sealing off the brake master cylinder reservoir so I looked at an a6 transmission equipped SS Camaro to see if it's brake master cylinder reservoir could be used. It appears the brake master cylinder reservoir is the same for the m6 and a6 transmission cars, the factory just breaks off a plug to attach the clutch slave line on the m6 models. Now I have to find the P/N for the master cylinder reservoir. Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.
|