View Single Post
Old 04-25-2009, 09:22 PM   #4

camaro5's Avatar
Drives: X-15 Velocipede
Join Date: Mar 2008
Location: SW Florida
Posts: 4,599
CAGS only looks at TPS, RPM, coolant temp, maybe a few other parameters, and then energizes the blocking solenoid to block 2nd and 3rd gears.

I'm not sure if the PCM knows what gear it's in, but even if it did, tapping into that data would be difficult or impossible.

An installer explained to me that they physically install a laser sensor in the shifter area to confirm neutral. That's why it's so expensive...

I've debated spending the money many times.

Of course, if we install it ourselves, we just leave mr. sensor out. But, that could turn into a nightmare...idk
Go from the presence of a foolish man, when thou perceivest not in him the lips of knowledge

General Motors ASEP, A.S. Automotive Technology, Telecommunications Specialist, CISCO Network Engineer

camaro5 is furnishing this information "as is". camaro5 does not provide any warranty of the information whatsoever,
whether express, implied, or statutory, including, but not limited to,
any warranty of merchantability or fitness for a particular purpose or any warranty that the contents of the information will be error-free.
camaro5 is offline   Reply With Quote