Quote:
Originally Posted by timmerk
Thanks RedRyder! I'm doing a very similar install on my 2008 GMC Sierra truck, but have some questions if you don't mind...
It appears I need the THGM610C harness. Did you use the THGM610 or THGM610C for your Camaro? Both harness manuals state:
How did you get around this? I know you mentioned some missing pins, but wouldn't you need many more pins, like for the tach, starter input, etc? Did you cut off the connectors of the harness on the DBALL2 side and just manually connect wires?
Thanks!
|
I used the THGM610 harness. I guess technically it is wired as a standalone? Since the DBALL2 is unaware that there's another piece of equipment piggybacking its signals.
The instructions for the DBALL2 have all the pin outs labeled in case you wanted to wire it up without the harness, so you simply tap into the wires that you need on the harness to send them to the advanced keys units. Tach, starter, ignition, lock, unlock, etc. included.