Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

MJ · 10-10-2010, 07:46 PM

I was wondering if anyone else has had any noises coming from their DSS 1,400 hp axles? Since axles were first installed I've had a clank on decel/accel (not the usual drive line noises). Have about 500 miles on them and clanking is getting louder. Shop that installed them has been extremely busy and I haven't been able to get them removed so I can return them to DSS for inspection. Car is putting down less than half the hp axles are rated for. Car hasn't seen any track time. No wheel hop... all key bushing replaced w/ Pedders. No clutch dumps... launch at 2500 rpm on 555R drag radials. Full lift on shifts. Maybe it's a fluke?

10-10-2010, 07:46 PM	#1
MJ Drives: 2010 Camaro SS/RS Join Date: Mar 2009 Location: NY Posts: 403	Drive Shaft Shop 1,400 hp axles.... I was wondering if anyone else has had any noises coming from their DSS 1,400 hp axles? Since axles were first installed I've had a clank on decel/accel (not the usual drive line noises). Have about 500 miles on them and clanking is getting louder. Shop that installed them has been extremely busy and I haven't been able to get them removed so I can return them to DSS for inspection. Car is putting down less than half the hp axles are rated for. Car hasn't seen any track time. No wheel hop... all key bushing replaced w/ Pedders. No clutch dumps... launch at 2500 rpm on 555R drag radials. Full lift on shifts. Maybe it's a fluke?