Quote:
Originally Posted by Gbland60
Just my 2 nickles worth but why can't you just order the aluminum splitter extension and bolt it on the bottom side with it extending out in front a half inch or so.this was an option I considered or make you a template bring it to a Fab shop and have them fabricate you one . some drilling and fabing on you part may be involved but atleast the aluminum would be the sacrificing lamb and not the actual splitter
|
If you need a front license plate, then the Sto n Sho license plate works well. No drilling, no extra holes. It works with the existing holes and screws in the Splitter. If you get into trouble, you will scrape the Sto N Sho first before the Splitter. The license plate is removable, but, you still have the Sto N Sho aluminum tubes underneath the middle of the Splitter, so, they scrape first.