Quote:
Originally Posted by JerTM
Yep, the 5 wire is for an L99.
Dark Blue - 5v Reference
Brown - Low Reference (ground to ECM)
Blue w/ White trace - Camshaft position signal
Purple - Camshaft Actuator Solenoid Control
Tan - Low Reference (ground to ECM)
|
I got that part. It's reading the slot numbers where they go. I have the maps and all. Just not too sure where to start counting from.
I only need to pin the the The extra 2 wires from the L99 timing cover connector would go to the camshaft actuator solenoid, which need to be connected to pins 52 and 16 on the 80 pin plug