Quote:
Originally Posted by CHMSC
RB rotors are guaranteed. They would of replaced them.
|
Nope. RB does not guarantee them in track applications. Just called and asked
Quote:
Originally Posted by JusticePete
That is about .5mm per side. .25mm had to be melted brake pad
How thick is each rotor face?
|
Final widths were 1.166 and 1.164 inches respectively. RacingBrake says not to machine these specific rotors down to under 28mm, which is 1.1 inches. So we are good.
Back of the Hawk DTC-30's below for anyone curious:
__________________
Dry sump LS7, cage, JPSS suspension, Wilwood brakes, fire suppression, ARH 3" headers/exhaust, Z/28 DSSV coilovers, Kirkey seats, TeamTech 6-point harnesses, 19" Forgeline GA3R, 325/30R19 Re11 tires, oil cooler, monster JPSS splitter/wickerbill, CAI, brake ducts.