Quote:
Originally Posted by Superman09
I have a 15 1ss 1le and I didn't have to swap the backing plate. As olblue said you will need new ZL1 specific lines. And if you can, get the vented pistons. I'm running vented pistons in mine and have had no problems, but a buddy with stock pistons boiled his fluid during fest at NCM.
Sent from my VS995 using Tapatalk
|
so ive been reading around and apparently the Corvette Z06 for 2015 calipers are the same as ZL1 just have the vented pistons
so if ive read everything correctly the Z06 caliper would bolt straight on and i could use either a ZL1 front rotor or Z06 rotor?
ive found brand new front calipers for a Z06 400 each
backing plates are only 16 each
so far
if everything im understanding is correct
get the Z06 calipers
ZL1 backing plates
ZL1 lines
ZL1 or Z06 rotors
Z06 pads with hardware
but what mounting bolts? Z06 bolts?