Quote:
Originally Posted by tnspd
Here are some pic of the mounting. I straightened the bracket to just a L shape so it would mount correctly and ran the hoses where they are not so obvious. I mounted the can to the bracket and then mounted the bracket and can to the frame area. There are 2 threaded holes on the frame the exact size of the bolt supplied. I used the outer threaded bolt hole as my mounting point. Use a lock washer on the bottom bolt so it does not loosen up. I have had this car on the drag strip and daily driving. It works great in this mounting area and is not so obtrusive to the engine bay.
|
I really like this spot for the can. Seems like a solid mounting. Gotta decide on a single/dual. I really appreciate everyone's input/advise. Thanks