Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com - View Single Post

01 SS · 02-17-2009, 07:42 AM

Be careful when you remove the tips becasue the small brace between the two has been known to crack and break. Also, when you re-install them you should make sure they are very tight. You'll find that they are not affixed to the pipes very well and I blew one end off once, luckily the entire assembly didn't fall off. To prevent this from happening again I fabricated a bracket for each side out of plain exhaust hangers and attached a hangar to each clamp.

02-17-2009, 07:42 AM	#7
01 SS Drives: 2001 Camaro SS, SLP# 110 Join Date: Oct 2008 Location: Victoria, BC Posts: 30 View My Garage	Be careful when you remove the tips becasue the small brace between the two has been known to crack and break. Also, when you re-install them you should make sure they are very tight. You'll find that they are not affixed to the pipes very well and I blew one end off once, luckily the entire assembly didn't fall off. To prevent this from happening again I fabricated a bracket for each side out of plain exhaust hangers and attached a hangar to each clamp. __________________ '01 SS, Navy Blue Metallic auto hardtop coupe, neutral leather, SLP factory options CME (Centre Mount Exhaust), SS grille, SS mats, SS dash plaque, SLP#C110 of 144.