View Single Post
Old 08-18-2017, 09:02 AM   #10
frankwjr


 
frankwjr's Avatar
 
Drives: 2010 SS 2SS M6
Join Date: Aug 2016
Location: Smithsburg, Md.
Posts: 2,445
Quote:
Originally Posted by rbenotti View Post
Like the new rims. The look is cool!
TKS! They are actually 'vette rims made back in 2012(!!!) guess that's why they went for such a low price..at 21lb fairly light IMHO(but very stout design!) and if the combo works I guess I will have to start lookin for front skinnies! I use H&R 30mm(!) hub extenders(not spacers) on all 4 corners so I can get away with the 56mm offset on these rims(will not fit without) and zero clearance probs on calipers or control arms...just tie the e-brake cable back and good to go..have about 1in clearance on the inside of the tire so no worries there....and with the 9.5 rim and this tire size when I drop the psi(will get close up pics at the track) to 20 or less should get a nice fat contact patch with good sidewall flex...at least that"s the plan!

Now if the GD rain would just GO AWAY PLEASE!!!!!!!!!!!!!!!!!!!!!!
__________________
2010 SS 2SS M6 - Tune by RDP dynoSteve!(Woot) - Daily Driver - 150K! - All work by me...
frankwjr is offline   Reply With Quote