[xxlbeerz]

Originally Posted by Topdown

is there a grill on the center speaker? if there is, just take it off, have a ring made (metal or MDF) that fits the gauge you want, go buy some spandex material at joanns or you local fabric store, mount the ring where you want the gauge to sit, stretch the fabric over the whole thing, staple it or glue it to the shape you want, go buy some fiberglass resin at ACE Hardware or even home depot mix up a batch, soak the fabric, then sand, bondo, sand, bondo, sand and then either paint it or stretch vinyl over it... wire and mount the gauge, put the grill back in place and your done.

or

take it to your local stereo shop and have one of the enclosure builders do it... anyone with some glassing experience should be able to build it for you fairly easy.

If somebody has a hook up for forming ABS I'd rather go that route.

I emailed Lo-Tek to see how much demand/qty. there has to be.