Quote:
Originally Posted by ronchev
I am too interested to see what you come up with, been thinking of this as well.
Also would like to come up with something for the fronts without going to coil overs and retaining the OEM Z springs/shocks...
|
Funny you say that, OP can you add to this post, for the rear what I found was there is a snap ring holding the spring perch, if you remove it you can move the perch down, there by lowering the car, now you may need to make a spacer for the top so spring is at the same pre load, more work to do but I will keep you guys updated, for the fronts GM did help a race team in moving a set to lower the front.