FlowForm FF15 Wheels for 6th Gen Camaro INSTALLED! - Check Photos inside!
We know you have been waiting, but yes, we have fitment information and photos for you here on the FlowForm FF15 Wheels for your 6th Gen Camaro!!
Below we have a selection of some photos during the test fit, then final installation shots so you can see how they sit on this chassis
19x10 ET25 front fitment
19x10 ET25 front fitment
19x10 ET25 front fitment
20x10 ET33 front fitment (requires 5mm spacer up front)
20x11 ET45 rear fitment
20x11 ET45 rear fitment
Installed - 20x9 ET25 front 20x10 ET33 rear
Available Fitments:
Front: 19x10 ET25 - 23.8lbs Each - (Requires 3mm spacer up front to clear strut)
Rear: 19x10 ET25 - 23.8lbs Each
Front: 20x9 ET25 - 23.2lbs Each
Rear: 20x10 ET33 - 24.4lbs Each
Front: 20x9 ET25 - 23.2lbs Each
Rear: 20x11 ET45 - 25.2lbs Each
Front: 20x10 ET33 - 24.4lbs each (Requires 5mm spacer up front to clear strut)
Rear: 20x11 ET45 - 25.2lbs Each
Thank you for taking a look, give us a shout if you have any questions!
Last edited by FlowForm_Wheels; 01-21-2016 at 05:55 PM.
|