Quote:
Originally Posted by Blue70SS
Here's where to turn off the P0128 DTC in EFI Live. I'll try this and see if I stop randomly loosing the gauges, along with the AC system being disabled. I'm hoping the actual DTC being triggered is what kills the gauges and AC until the code is cleared.
I know the sensors for engine coolant temp and oil temp have been working, because I can view them on my Aeroforce gauges that get data from the OBDII port. 
.... notice that ECT is still monitored for "sensor performance", "sensor circuit low", and "sensor circuit high" - so it's not being left totally unmonitored. |
So.... turning off the P0128 DTC in the tune does in fact make this situation go away entirely. However I do have a 160 degree thermostat that is working perfectly and I monitor it anyway, plus turning off the DTC is not going to stop "high coolant temp" from being displayed, so for me its a permanent fix. I no longer get the code that shuts down the AC and my center console gauges don't go dead now.
__________________
LPE 650+,IOM Pearl White Rallys
860 RWHP 924 RWTQ,TVS2300 10/14 OD 2.75/NW 102mm,RDS/FLOWED "109" SHOT/LPE NCC
NLP spoiler/GM splitter/Torq HE-fans/oil coolers/IC1000cc
Squash twins,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit
LPE Brotherhood
.
|