|
Looks like I'll be spending some time on sheet metal work for a day or two. Got everything back from sandblasting so I want to get them in epoxy primer as soon as possible. The aprons are nearly perfect. The trunk came out really good, there is one corner that needs some work, there was a mouse nest packed in there and it most likely held moisture in that one area. There is more work fixing other peoples crap again. There is/was a dent in the trunk, it's easily accessible with a dolly but who ever did the work before drilled 5 holes and used a dent puller on it. Now I'll have to fill the holes and do the hammer and dolly work. I also decided to fill the holes in the rear fenders that were used to mount the running lights, I'll be doing something else.
The Acculink TPS came in but not the module so I got that set up. It is a really good design, they also had an optional bracket already made for a Quadrajet with a Lokar cable so installation took about 10 minutes.
|