Quote:
Originally Posted by JANNETTYRACING
Slipping or Slapping a bit of confusion here.
Do not use an RPM belt they are JUNK
|
As of right now the belt gets close, but the belt is not slapping the other belt and knocking it off.
It is slipping, because its bouncing around at 10-11 lbs. It peaks at 12 lbs for a split second, but fall right off right after the initial hit. According to the log.
It was making a steady 11.5 lbs on the previous 3.25 pulley and stock balancer. So I was figuring it should make 13 lbs now with the 3.00 and 8% OD balancer.
Never had any issues with the RPM belts when I was a 6 rib.
What issues do you guys run into?